Even with all our fancy algorithmic bidding and targeting, a shocking 62% of PPC accounts are still wasting money on keywords with zero conversions over 90 days, based on a late 2025 Statista report on global PPC spending. This kind of waste is a silent budget killer, and it’s often hidden by the account’s overall good performance. So the real question is, what’s your plan for fixing these low-performing keywords or just cutting them loose?
Key Takeaways
- If a keyword’s CTR is below 0.5% with zero conversions for 60 days, pause or re-evaluate it. That’s a clear sign of poor ad-to-search alignment or a bad copy mismatch.
- Dig into your search term reports for exact match keywords that get high impressions but few clicks. You’ll find negative keyword opportunities that can cut wasted spend by up to 15%.
- For a broad match keyword, if its cost-per-conversion (CPC) is 1.5 times higher than your account average and it has fewer than 5 conversions in 90 days, you need to slash its bid or tighten it to phrase match immediately.
- Set up a structured test for underperforming keywords. Tweak the ad copy, landing page, or match type and give it a solid 30 days in that controlled environment before you make a final call.
- Don’t be scared to prune your account. Regularly archiving keywords that just aren’t profitable frees up cash for your winners, which can improve your overall campaign ROAS by an average of 10-12%.
The 0.5% CTR Threshold: A Warning Sign for Exact Match Terms
When I’m digging through a client’s account, the first red flag I look for is an exact match keyword with a click-through rate (CTR) under 0.5% over 60 days, especially if it has zero conversions. Those wasted impressions are a symptom of a deeper problem: a total disconnect between the search query, your ad copy, and maybe even the landing page. Imagine an exact match term like “luxury watches for men” getting 5,000 impressions but only 20 clicks. That 0.4% CTR tells me that even though people are looking for the product, your ad is completely failing to grab their attention. Maybe the headline doesn’t even say “luxury,” or the call-to-action is just “Click Here.” In my experience, a healthy exact match keyword that’s dialed in should hit a CTR of 3% or more without breaking a sweat. Anything way below that is a signal to immediately rewrite ad copy, check your ad extensions, and see what your competitors are doing. Often, the keyword is fine. The presentation is the problem.
The 30-Day Zero Conversion Rule: When to Act on Broad Match
With broad match keywords, I use a different benchmark: zero conversions over a 30-day rolling window, especially if the spend is piling up. Broad match is meant to cast a wide net, so you expect some irrelevant searches. The real problem is letting those irrelevant queries eat up your budget for a month with nothing to show for it. A HubSpot study from 2025 found that companies can overspend by as much as 18% on broad match terms that just never convert. If a broad match keyword like “marketing services” has burned through $500 in 30 days with no conversions, it’s time to step in. Before I even think about deleting it, my first move is always to dive straight into the search term report for that keyword. What are the actual queries people are typing? You’ll almost always find garbage terms that belong on your negative keyword list, like “marketing services jobs” or “free marketing services” draining your budget. It’s about being a surgeon, not a butcher. Aggressively adding negatives can often save a broad match term and make it profitable.
Beyond the Obvious: High Impression, Low Click Exact Match Keywords
This is a spot where a lot of managers miss an opportunity. Most people just focus on keywords with high spend and no conversions. But I find a ton of hidden waste (or potential) in exact match keywords that have tons of impressions but almost no clicks. Let’s say you have the exact match keyword “best vegan protein powder” with 10,000 impressions this month but only 50 clicks (a 0.5% CTR) and no conversions. The knee-jerk reaction is to pause it. But wait. All those impressions mean the search demand is there. The pathetic CTR suggests your ad isn’t connecting, or your Quality Score is so low that you’re stuck at the bottom of the page despite being relevant. Before pausing, I’d check the Quality Score components. Is Google flagging the expected CTR, ad relevance, or landing page experience? A lot of the time, just rewriting the ad headline to perfectly match the keyword or making sure the landing page talks directly about “best vegan protein powder” reviews can turn things around fast. I’ve seen simple optimizations like these take a keyword’s CTR from 0.5% to 5% in a couple of weeks, turning it into a money-maker. You have to diagnose the actual issue instead of just reacting to the symptom.
The False Promise of “Low CPC” Keywords: A Cost-Per-Conversion Trap
I see this mistake all the time, particularly with green PPC managers: they get obsessed with low cost-per-click (CPC) and think it means the keyword is a winner. This oversimplification is dangerous because it leads to chasing cheap, useless clicks from low-performing keywords. I constantly have to remind clients to ignore CPC and focus on what matters: cost-per-conversion (CPA) or return on ad spend (ROAS). For example, a keyword might have a $0.50 CPC, which looks amazing in a report. But if it takes 200 of those cheap clicks to get one sale, your CPA is $100. Now compare that to another keyword with a “high” $5.00 CPC that converts every 10 clicks, giving you a $50 CPA. The “expensive” keyword is actually twice as profitable. A 2024 report from the Interactive Advertising Bureau (IAB) confirmed this, showing that advertisers who focused too much on CPC saw their ROAS underperform by 15%. My rule is simple: if a keyword’s CPA is consistently 50% higher than your goal, it’s a money pit. You either have to drop its bid to a point where it might become profitable, or you just pause it. Don’t chase cheap clicks. Chase profitable conversions.
The Misconception: “Just Pause Everything That Doesn’t Convert”
Now, I’m going to push back on a common bit of advice: the knee-jerk reaction to pause any keyword that hasn’t converted recently. While it sounds logical, this tactic can really screw things up, especially for businesses with long sales cycles or high-ticket items. A B2B software company, for instance, could have a 60 or 90-day journey from first click to final purchase. A keyword that hasn’t converted in 30 days might be an important first touchpoint, getting your brand in front of a potential customer who will convert two months later. Pausing it cuts a hole in your funnel. So instead of just pausing, I look at the multi-touch attribution reports. Is this keyword getting a lot of assisted conversions? Is it driving traffic that converts later on a branded search? Tools like Google Ads have attribution reports that show you this. If a keyword is consistently assisting other conversions, it has value, even if it has zero last-click sales. The decision to pause has to be based on its total contribution, not just a single metric. A keyword’s real value isn’t always obvious on the surface, which is where patience and deeper analysis pay off.
Fixing your low-performing keywords requires more than just looking at a dashboard. You’ve got to dig into CTRs, pull search term reports, calculate your true cost-per-conversion, and be willing to question the standard playbook. That’s how you turn budget drains into profitable opportunities. To get better at this, check out how real-time PPC adjustments can make or break a campaign. Also, having accurate PPC data is non-negotiable for making good decisions. And if you’re using automation, make sure you’re not falling for common PPC automation myths that can cripple your accounts.
How often should I review my PPC keywords for performance?
I do a quick check weekly on the main metrics (CTR, CPC, conversions). Then, once a month, I go deep, search term reports, Quality Score checks, the works.
What’s the difference between pausing a keyword and deleting it?
Pause it. Pausing just benches the keyword, so you can bring it back later for another try. Deleting is permanent, and you lose all its historical data. I almost always pause first.
Can negative keywords help improve low-performing keywords?
Yes, they’re essential, especially for refining broad and phrase match terms. Adding irrelevant search queries as negatives stops you from wasting money on bad clicks and makes your keywords much more effective.
Should I always lower bids for low-performing keywords?
No, don’t just default to that. Lowering bids is one tool, but if your ad copy or landing page is the real problem, a lower bid won’t fix it. You have to diagnose the root cause before you start tweaking bids.
How do I identify which keywords are truly low-performing versus those that just need more time?
It all comes down to your sales cycle. If you’re selling t-shirts, 30 days with no sales is a huge red flag. If you’re selling enterprise software, you might need 60 to 90 days of data and a close look at assisted conversions before you can make a final call.
