Listen to this article · 17 min listen

When two companies merge, their PPC accounts are usually a train wreck. A post-merger campaign audit is how you fix it, it stops you from wasting budget, helps you find opportunities where you can combine strengths, and gets you to a single, coherent brand message. If you don’t have a structured plan, you’re going to end up cannibalizing your own keywords, duplicating work, and getting clobbered by the competition. So how do you actually take years of messy ad data from two different companies and build one high-performing PPC strategy out of it?

Key Takeaways

  • First thing: get all historical campaign data from both companies into one Google Ads Manager account so you have a single source of truth.
  • Hunt down and kill duplicate keywords and ad groups, especially where the search intent overlaps, to stop bidding against yourself.
  • Standardize all your conversion tracking by deploying a single Global Site Tag and double-checking your event parameters in Google Analytics 4.
  • Build a new, unified budget model based on the ROI you expect from each product line, then adjust your bids and daily caps in Google Ads to match those new priorities.
  • Plan on doing another audit in 90 days to see how your initial changes are working, paying close attention to cost-per-acquisition (CPA) and impression share.

Step 1: Consolidate Accounts and Data Sources

Your first problem in any post-merger audit is just seeing what you’ve got. Each company likely has its own Google Ads account, sometimes several, and your job is to get it all centralized into a single dashboard. That’s what this first step is all about.

1.1 Link Google Ads Accounts to a Manager Account

If you don’t have a Google Ads Manager Account (MCC), create one now. It’s the command center for all your client accounts. Once you’re in your Manager Account, go to the Accounts tab in the left-hand navigation. Click the blue plus (+) button and choose Link existing account. You’ll need to enter the 10-digit customer ID for every Google Ads account you’re bringing in, from both the acquired company and your own. After you send the link requests, the admins on those accounts have to approve them. This isn’t instant, it can take a few hours for the admins to approve, so get these requests sent out first thing.

1.2 Export Historical Data

Once the accounts are linked, you need to pull the raw data for analysis. Go into each individual account and head to Reports in the top menu bar, then Predefined reports (Dimensions), and pick Time > Month. Make sure you customize the date range to pull at least the last 12 to 24 months of data, which is long enough to let you spot seasonal trends, and include all the key metrics like Clicks, Impressions, Conversions, Cost, and Conversion Value before exporting the reports as .csv files. You’ll need to repeat this process for both Keyword reports (Basic > Keyword) and Search Term reports (Basic > Search Term) to get the granular detail you need. I’ve found that pulling reports for individual campaigns and ad groups often shows you important details that get lost in the big aggregated reports.

1.3 Integrate Third-Party Platform Data

Lots of companies run ads on Microsoft Advertising or social media platforms, too, so make sure you export the same kind of historical data from those sources. The goal here is consistency. If you’re pulling Google Ads data for January 2024 to December 2025, your Microsoft Advertising data needs to cover the exact same period with the same performance metrics. You have to harmonize the data. If one platform defines a “conversion” differently than another, your whole audit will be built on a faulty foundation and your results will be skewed.

Pro Tip: Use a tool like Google Looker Studio or Tableau to pull all these different CSV files together into one dashboard. It makes it way easier to spot trends and weird outliers across platforms once you can see it all at once. Also, do yourself a favor and create a strict naming convention for all campaigns and ad groups going forward. It will save you so many headaches in future reporting.

Step 2: Keyword and Ad Group Rationalization

Now that all your data is in one place, you can start digging for redundancies and opportunities in your keyword lists. This is where you’ll find some of the biggest budget savings.

2.1 Identify Duplicate Keywords and Ad Groups

Open your big, consolidated keyword report in a spreadsheet program and create a pivot table. Put “Keyword” in the rows and “Account Name” in the columns. Now, just filter for any keyword that shows up in more than one account. This pivot table instantly shows you exactly where you’re bidding on the same keyword from two different accounts. If both companies were bidding on “CRM software for small business,” you’ll see it pop up twice. Sort by cost so you can tackle the most expensive overlaps first. Do the same thing for your ad group names and their keywords, because you’ll often find that different teams built ad groups targeting the exact same intent, even if the keywords aren’t perfect matches.

2.2 Analyze Search Intent and Performance

For every duplicate or overlapping keyword you find, you need to dig into its actual search terms and performance metrics (CTR, Conversion Rate, CPA). In Google Ads, you can do this by going to Keywords > Search terms for the campaigns in question. You have to compare the real queries that triggered the ads. Is the user intent truly the same? Sometimes what looks like a duplicate keyword is actually serving a completely different audience; “project management tools” from one account might be bringing in IT directors, while the other’s “project management tools” is attracting GCs in construction. If the intent is identical, you have to consolidate them into a single ad group in your main account and pause the lower-performing duplicates everywhere else. This stops you from bidding against yourself, which is a classic way to drive up your own CPCs for no good reason.

2.3 Consolidate and Restructure Ad Groups

After you’ve dealt with the duplicate keywords, look for ad groups you can merge. Review ad groups from both companies that target similar services. Say Company A had an ad group for “Enterprise Solutions” and Company B had one for “Corporate Services,” but both were selling similar B2B software. You should probably combine them into one stronger ad group. Doing this lets you write much sharper ad copy and build landing pages that speak directly to a specific audience, which is always better for conversion rates. The Recommendations tab in Google Ads can give you a head start with its “Remove redundant keywords” and “Create new ad groups” suggestions, but don’t just blindly accept them. I treat Google’s recs as a first filter, but they never have the full strategic context that a person does.

Common Mistake: Just pausing a duplicate keyword without looking at its history. You might be shutting off a keyword that, while redundant, was actually bringing in high-quality leads because of some specific negative keywords or ad copy in its original ad group.

Step 3: Conversion Tracking Standardization

If your conversion tracking is a mess, you’re flying blind. It’s the one thing that will absolutely sabotage any attempt to analyze PPC performance post-merger, because without a single source of truth for conversions, you can’t attribute success or optimize your bids properly.

3.1 Implement a Unified Global Site Tag (GTAG)

First, you have to get every website and landing page from both companies onto a single Global Site Tag (GTAG) or Google Tag Manager (GTM) container. If each company had its own GTAG, you’ve got to consolidate. The easiest way is to pick one of the existing GTAGs (usually the one from the primary company or whoever had the better tracking setup) and roll it out across every single web property. Then, you have to go back and remove all the old ones. This is the only way to ensure all website activity funnels into a single Google Analytics 4 (GA4) property.

3.2 Standardize Conversion Actions in Google Ads

In your main Google Ads account, go to Tools and Settings > Measurement > Conversions. You need to review every single conversion action that’s been pulled in from both companies. You’ll almost certainly find duplicates, like “Contact Form Submission” from Company A and “Lead Form Submit” from Company B. Your goal is to define one standard set of conversion actions for the new, combined business. For example, if both companies considered a demo request a primary conversion, create one “Demo Request” conversion action and set its “Count” to “One” if you don’t care about repeat submissions from the same user, or “Every” if you do. Then import these new standard conversions from your unified GA4 property and make sure the “Primary action for optimization” setting is correct for each one, as this directly tells the automated bidding what to chase.

3.3 Verify Conversion Data in Google Analytics 4

Once the new GTAG is live and your conversion actions are set up, you have to check that the data is actually flowing into GA4 correctly. Go to Reports > Realtime in GA4 and then perform some test conversions on your site, like filling out a form or making a test purchase. You should see those events pop up immediately. Then go to Admin > Data display > Conversions in GA4 and check that your most important events are toggled on as “Marked as conversion.” Don’t skip this verification. It’s what ensures your reports are accurate and that Google Ads gets the right data to feed its optimization algorithms. A bad GA4 setup will absolutely wreck your Smart Bidding performance.

Editorial Aside: Seriously, don’t underestimate how complicated this step can get. I’ve seen entire marketing budgets go down the drain because someone botched the conversion tracking after a merger. It’s often the last thing people think to check, but it should be one of the first. If you’re not 100% confident, paying a specialist for a few hours is money well spent.

Step 4: Budget Allocation and Bid Strategy Alignment

Okay, with clean data and standardized tracking, you can finally start making smart decisions about your budget and bidding to fit the new company’s goals.

4.1 Consolidate Campaign Budgets

Go through the historical spend and performance of every campaign from both of the old companies. Find the product lines or services that are now redundant or just don’t exist anymore. Your new budget allocation should reflect the new company’s actual strategic priorities and what you realistically project for ROI. In Google Ads, go to your Campaigns list. For campaigns you’re merging, you’ll generally pause the weaker one and shift its budget to the stronger one. If you’re creating brand new campaigns for combined offerings, you’ll need to set a new daily budget based on market and competitor research. For example, if Company A spent $5,000/month on “cloud storage for enterprises” and Company B spent $3,000/month on “enterprise data solutions,” a new combined campaign for a superior offering might get a $9,000/month budget to reflect its bigger market potential.

4.2 Align Bid Strategies

Look at the bidding strategies each company was using before the merger. One might have been all-in on “Target CPA” while the other just used “Maximize Conversions.” Now that you have clean, unified conversion data, you can pick the right strategy for your new goals. If you need to hit a specific cost per lead, “Target CPA” is your best bet. If you just need as many conversions as possible within your budget, go with “Maximize Conversions.” For each campaign, go into Campaigns > Settings > Bidding and adjust the strategy and any targets (like CPA or ROAS) to match your new business objectives. But be careful: Smart Bidding needs a steady diet of conversion data to work right, so make sure your new unified tracking has been running for at least a few weeks and has logged enough conversions before you switch everything over.

4.3 Implement New Ad Schedules and Geo-Targeting

Mergers almost always mean you’re serving new areas or have different business hours. You need to review the ad schedules (Campaigns > Ad schedule) and geo-targeting (Campaigns > Locations) for every single campaign. If the new company covers a wider area, expand your location targeting accordingly. If business hours changed, adjust your ad schedules so you’re not wasting money when no one is there to answer the phone. For instance, if one company was East Coast-focused and the other was on the West Coast, you now need a schedule that covers both time zones effectively, which might mean running ads 24/7 or using bid adjustments to bid up or down in certain regions at certain times. This is also a good time to use location bid adjustments to be more aggressive in areas with a history of good performance or that are strategically important to the new company.

Pro Tip: Don’t just flip a switch and change all your campaigns to a new bid strategy overnight. Roll out these changes in phases and watch your performance like a hawk. I recommend A/B testing different strategies on similar campaigns, for example, run “Target CPA” on half your lead-gen campaigns and “Maximize Conversions” on the other half for a month to see what the data tells you before you commit.

Step 5: Ad Copy and Landing Page Optimization

The last big piece of the audit is making sure your messaging and user experience actually reflect the new, single brand.

5.1 Update Ad Copy for Unified Branding

You have to read every single piece of active ad copy, headlines, descriptions, sitelinks, callouts, everything. Make sure all of it uses the new company name, follows the new brand guidelines, and communicates the new value propositions. Get rid of any mention of the old company names or products that don’t exist anymore. In Google Ads, go to Ads & Extensions and filter your way through each campaign and ad group. Your job is to write new ads that combine the best of both worlds. If Company A was famous for “24/7 Support” and Company B was known for “Industry-Leading Security,” your new ads need to say both. Responsive Search Ads (RSAs) are great for this, as they let you test a ton of different headline and description combos at once.

5.2 Consolidate and Optimize Landing Pages

Your landing pages need the same treatment as your ad copy. Go through all the landing pages that your PPC ads point to and find the ones that are now redundant or for discontinued services. You’ll need to consolidate that content onto a smaller set of stronger pages that reflect the new, combined offerings. Make sure every page has the new company’s branding and clearly explains what you’re selling. Check everything for mobile responsiveness, page speed (use a tool like Google PageSpeed Insights), and obvious calls-to-action. If a landing page from the acquired company was a top performer, don’t just kill it. Figure out what made it work and incorporate those elements into the new site, or at least set up a redirect to a comparable new page. Nothing kills trust (and your conversion rate) faster than a broken link or an outdated landing page.

5.3 Implement New Ad Extensions

Ad extensions are free real estate for giving users more information and making your ad stand out. Go through all the old extensions and create new ones that reflect the combined company. This could mean new structured snippets that show off your merged service categories, new callouts that talk about your combined benefits, or new location extensions if you’ve integrated physical offices. In Google Ads, you’ll find these under Ads & Extensions > Extensions. Make sure you have a full set of extensions running at the account, campaign, and ad group levels where it makes sense. And don’t forget to update any price or promotion extensions with new offers.

Look, a post-merger audit isn’t a one-and-done project. It’s a constant process of tweaking and adapting. By systematically cleaning up your data, keywords, tracking, budgets, and creative, you turn two separate (and probably messy) PPC programs into a single engine for growth. The hard work you put in during these first few months will pay off for a long time in lower costs and a bigger piece of the market. To learn more about making your ad strategies work, check out our article on PPC Ad Copy: Brand Impact Blind Spots in 2026. Post-merger efficiency also means knowing how to slash ad spend. And to make sure your whole PPC strategy is built to last, you might want to review the principles in our guide to PPC Resilience: GEISTE Framework for 2026.

How long does a typical post-merger PPC audit take?

It really depends on how big and messy the accounts are. For two mid-sized companies, you’re probably looking at 4 to 8 weeks for the initial cleanup, analysis, and first round of changes. If you’re dealing with a huge, complex merger involving multiple large accounts, it could easily take 3 to 6 months to get everything fully integrated and stable.

What are the immediate red flags to look for during a post-merger PPC audit?

The biggest red flags are seeing duplicate keywords actively bidding against each other (which just inflates your CPCs), having different conversion tracking setups on different sites (making it impossible to compare performance), finding ads still running with old branding, and seeing wild budget differences between similar campaigns from the two old companies with no good reason.

Should we pause all campaigns from the acquired company during the audit?

No, don’t just pause everything at once. That’s a great way to kill your lead flow overnight. The smart move is a phased transition. Start by pausing the most obvious duplicates and clear underperformers. Then, you can gradually move the good stuff, winning keywords and ad copy, from the acquired company’s campaigns over to the main account’s structure. This keeps performance steady while you consolidate.

How often should we re-audit our PPC campaigns after a merger?

After you finish the big initial audit, you should plan on doing a smaller “mini-audit” or performance review every quarter for the first year. This lets you check on your changes, spot new problems, and make adjustments. After that, a full, deep-dive audit should just become a normal part of your annual marketing plan to keep things efficient and aligned with business goals.

What tools are essential for conducting a post-merger PPC audit?

The essentials are a Google Ads Manager Account (to see everything in one place), Google Ads Editor (for making bulk changes), a spreadsheet program like Google Sheets or Excel (for all the data crunching), Google Analytics 4 (for unified tracking), and maybe a data visualization tool like Google Looker Studio to build a master dashboard. It’s also helpful to have a tool like SEMrush or Ahrefs for competitive and keyword research during the process.